VPS®C Series Dry Screw Vacuum Pump
(Variable Pitch Screw Pump)
Excellent corrosive gas and entrain liquid handling capabilities and realizes 10-3 torr vacuum degree
?VPS dry vacuum pump includes the standard advantage of the P Series(Single Pitch) model ad following details
(Low utimate pressure, corrosion resistance, cooling effect, etc.)
Low Ultimate Pressure
The dry vacuum pumps can operate continuously in all the ranges of pressure from atmosphere to the ultimate pressure, and it can reach at 0.0075Torr(1Pa) by itself and has a high efficiency.
Corrosion Resistance Design
- Suitable for pumping Toxic, Corrosive and condensable gas by special coating(PTFE, PFA, Ni, NIFA).
- Prevents condensation of corrosive gas through lowering vapor pressure by the gas ballast.
Cooling Effect is good
- No Cooling Gas necessary.
- Unique hydrodynamic spiral jacket structure.
- Reduce discharge temperature greatly & close to T4 requirement.
Power Consumption
- Variable pitch screw design.
- Power consumption reduced 30%
Characteristics of VPS-C Series Vacuum Pump
Reliable seal structure
● Mechanical seal and lip seal applied.
● Dry vacuum pump exclusive mechanical seal.
● Protect from dust & etc to purge Air & N2 in front of mechanical seal.
Applid variable pitch screw
● Prevention of coating damage by pump temperature rise
● Reduction of power consumption by 30% by energy-saving design
Vacuum degree improvement
● Reaches the maximum vacuum degree 0.0075Torr(1Pa)
● Increase pumping volume from high vacuum
● Maintains stable volume from atmospheric pressure up to 1Torr
Spiral coolant jacket
● Excellent cooling efficiency of the spiral jacket
● Low operating temperature
● Controls temperature inside the pump with a small amount of coolant
Material of construction
● Casing :Ductile Iron(Teflon Coated, PTFE)
● Screw : Ductile Iron(Teflon Coated, PTFE)
● Shaft Seals
- Suction(Rear) : Double Lip Seal & Single Lip Seal
- Discharge(Front) : Mechanical Seal & Lip Seal
- Drive End : Oil Seal
● Bearings
- Suction(Rear) : Roller Bearing
- Discharge(Front) : Angular Double Ball Bearing
- Drive End : Single Ball Bearing
● O-ring : Viton
However, the followings are also available ;
? Special coatings Teflon(PFA), NIFA, Ni Plated, etc
? Special O-rings such as Kalrez
? Special Mech. Seals like Hastelloy, Ni-resist
Smooth discharge structure
● Short gas path through the pump make quick gas discharge
● Smooth condensate draining within the pump
● Excellent liquid handling ability
IEC Flange (NEMA Optional)
● Mostly C-flange design Simplified mounting reduce noise level and eliminate shaft alignment
● Rib enhancement for deformation and vibration prevention
Grease leakage prevention
● Triple single lip seal
● Applied the optimized grease space
VPS-C Series Dry Screw Vacuum Pump Technical Data
|
ITEM
|
VPS-C130 |
VPS-C300 |
VPS-C400 |
VPS-C800 |
||
|
Displacement
50/60Hz
|
M3/h |
110/130 |
250/300 |
330/400 |
680/800 |
|
|
CFM |
64.7/76.5 |
147.1/176.5 |
194.2/235.4 |
400.2/470.8 |
||
|
Ultimate Pressure |
(Torr) |
0.03/0.01 |
0.01/0.0075 |
0.01/0.0075 |
0.01/0.0075 |
|
|
(Pa) |
4.0/1.33 |
1.33/1.0 |
1.33/1.0 |
1.33/1.0 |
||
|
Power (Kw,50/60Hz) |
3.7 |
7.5 |
11 |
15 |
||
|
Rotation (RPM) 50/60Hz |
2900/3500 |
2900/3500 |
2900/3500 |
2900/3500 |
||
|
Port Size |
Inlet (A) |
40 |
50 |
65 |
100 |
|
|
Outlet (B) |
40 |
40 |
50 |
65 |
||
|
Gear Oil (L) |
1.0 |
1.0 |
1.2 |
2.0 |
||
|
Cooling Water (L/min) |
5~10 |
10~15 |
10~15 |
15~20 |
||
|
Weight (Kg,Body) |
190 |
290 |
370 |
580 |
||
|
ITEM |
VPS-C200 |
VPS-C350 |
VPS-C450 |
VPS-C650 |
VPS-C900 |
VPS-1500 |
VPS-C1800 |
VPS-C2700 |
|
|
Nomibal
Displacement |
M3/h |
160/200 |
280/350 |
360/450 |
540/650 |
750/900 |
1250/1500 |
1500/1800 |
2250/2700 |
|
CFM |
94.2/117.7 |
164.8/206 |
211.9/264.8 |
317.9/382.6 |
441.4/529.7 |
735/882.8 |
882.8/1095.4 |
1324/1589 |
|
|
L/min |
2667/3333 |
4667/5833 |
6000/7500 |
9000/10800 |
12500/15000 |
20833/25000 |
25000/30000 |
37500/45000 |
|
|
Ultimate Pressure |
mbar |
0.04/0.013 |
0.013/0.01 |
0.013/0.01 |
0.013/0.01 |
0.013/0.01 |
0.13/0.07 |
0.13/0.07 |
0.13/0.07 |
|
torr |
0.03/0.01 |
0.01/0.0075 |
0.01/0.075 |
0.01/0.0075 |
0.01/0.0075 |
0.1/0.05 |
0.1/0.05 |
0.1/0.05 |
|
|
Pa |
4.0/1.33 |
1.33/1.0 |
1.33/1.0 |
1.33/1.0 |
1.33/1.0 |
13.3/6.7 |
13.3/6.7 |
13.3/6.7 |
|
|
Power (50/60Hz)(kW) |
5.5 |
7.5 |
11 |
15 |
18.5 |
37.0 |
37.0 |
55.0 |
|
|
Port Size |
Suction(A) |
40 |
50 |
65 |
80 |
100 |
125 |
125 |
150 |
|
Discharge(B) |
40 |
40 |
50 |
65 |
65 |
80 |
80 |
100 |
|
|
Cooling Water (L/min) |
5 |
10 |
10 |
15 |
15 |
20 |
20 |
28 |
|
|
Gear Oil Front(L) |
1.0 |
1.0 |
1.2 |
2.0 |
2.0 |
5.3 |
5.3 |
7.4 |
|
|
Rotation (50/60Hz)(RPM) |
2900/3450 |
1450/1750 |
2900/3450 |
1450/1750 |
|||||
|
Weight Pump Only (Kg) |
220 |
320 |
410 |
550 |
630 |
1350 |
1200 |
2500 |
|
Dimensions
|
Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
Inlet |
Outlet |
|
VPS-C130 |
957 |
700 |
764 |
554 |
254 |
108 |
355 |
770 |
670 |
571 |
490 |
40A |
40A |
|
VPS-C300 |
1272 |
745 |
858 |
702 |
400 |
150 |
412 |
890 |
772 |
605 |
520 |
50A |
40A |
|
VPS-C400 |
1487 |
855 |
911 |
750 |
443 |
167 |
430 |
1000 |
900 |
634 |
554 |
65A |
50A |
|
VPS-C800 |
1812 |
905 |
1010 |
861 |
585 |
178 |
457 |
1350 |
1200 |
675 |
585 |
100A |
65A |
Model
A
B
C
D
E
F
G
H
VPS-C200
740
1270
357
696
260
645
908
350
VPS-C350
940
1400
443
795
282
769
927
420
VPS-C450
1040
1745
492
819
312
786
1027
437
VPS-C650
1240
1792
555.5
912.5
402
939
1163
520
VPS-C900
1240
1905
555.5
912.5
402
939
1163
520
VPS-C1500
1755
2210
761.6
825.5
760
1282
1470
675
VPS-C1800
1750
2059
647.8
969
740
1185
1393
588
VPS-C2700
1700
2398
871
1028
600
1412
1500
818
Performance Curve
VPS® C Series Dry Screw Vacuum Pump
ITEM
